|
|
|
 |
| The MPD-810H-V is a 30 ~ 120 VDC DC/DC open frame ATX power supply that can handle both 48V and 90V DC input, configured as
either 85 watts convection cooling or 120 watts forced air-cooling DC/DC converter. The MPD-810H-V DC/DC converter features ATX output (3.3V/5V/-5V/12V/-12V/5V stand-by) utilizes thermally
efficient U-channel chassis and has no noise quality. The MPD-810H-V is designed as a component for telecommunication applications, and other general microprocessor based fanless applications.
This power supply is
typically used in 48V
DC input applications. |
| Read full detail |
Download full specification |
| Availability |
In Stock |
| EMAIL US FOR A QUOTE |
|
|
- 85W convection cooling or 120W with forced air-cooling
- Wide range 30~120VDC Input
- Compact 1U height , thermal efficient U-channel design
- Isolated, chassis mount, norminal 48V and 90V DC input
- 3.3V/5V/12V/-12V DC outputs, 5V Stand by
- Rated at 50 °C
- Support PG/PF and remote On/Off
- 100% 50 °C burn-in
- MTBF>140,000 hr. Mil-217F
- Rohs compliant
- 2 years warranty
|
| Input Type |
DC |
| Input Voltage |
30-120 VDC |
| Input Current |
7A @ 30VDC |
| Inrush Current |
70A @ 10VDC |
| Outputs |
+5V |
+3.3V |
+12V |
-12V |
+5Vsb |
| Minimum Output Current |
1A |
0A |
0A |
0A |
0.1A |
| Rated Output Current |
8A |
5A |
1.5A |
0.5A |
0.75A |
| Maximum Output Current |
10A |
8A |
4A |
1A |
- |
| Line Regulation |
2.5% |
2.5% |
2.5% |
2.5% |
2.5% |
| Load Regulation |
2% |
5% |
5% |
5% |
- |
| Ripple and Noise (peak to peak) |
100 mV |
50 mV |
120 mV |
200 mV |
120 mV |
| Efficiency |
> 70% |
| MTBF |
149,254 hours at 50 °C |
| Power On/Off |
The power supply will start-up when the power On/Off pin is connected to secondary GND. |
| Power Good Signal |
When the power is turned on, the power good signal will go between 100ms to 500ms after all output DC voltage are within regulation limits. |
| Power Fail Signal |
The power fail signal will go low at least 1ms before any of the output voltages fall below the regulation limits. |
| Overload Protection |
Fully protected against output overload and short circuit. Automatic recovery upon of overload condition. |
| Safety |
UL 60950
CSA 22.2 No.234
EN 60950 |
| Radiation/Conduction |
FCC docket 20780 curve " B"
EN 55022 "B" |
| Operating Temperature |
0~50 °C |
| Storage Temperature |
-40~70 °C |
| Altitude (max) |
up to 10,000 ft |
| Width x Length x Height |
3.3 x 6.0 x 1.5" (inch) |
|
|
| |
| MPD-810H-V |
85W 30~120V fanless ATX DC/DC power supply |
| Cover (No.831-810U) |
Aluminum. Optional provided with 4 cm x 4 cm DC fan |
| Cable (No. 866-810H) |
ATX wuth P4 connector, HDD connector x 2, FDD connector x 1 |
|
| |
| MPD-810H |
85W 10~30VDC fanless ATX DC/DC power supply |
| MPD-810V |
80W -36~ -72VDC fanless quad output DC/DC power supply |
| MPD-830V |
300W -40~ -72VDC metal enclosed ATX DC/DC power supply |
| MPD-425V |
250W 48V metal enclosed quad output DC-DC power supply |
|
